Pod Provisioning Service

Pod Provisioning/Creation

ESS’ Pod Provisioning Service manages the creation of Pods, using the following URL format:

https://storage.{ESS Domain}/{Unique Root Container}/

Prior to version 2.0, ESS Pods used URLs of the form https://{ESS Domain}/{username}/ .

Default Resource (Extended Profile)

When creating a Pod, ESS creates an extended profile resource. The extended profile resource is separate from the public WebID profile. The extended profile resource, unlike the public WebID profile, is hosted in the user’s Pod, and by default, is private. Users can grant or deny access to their extended profile like any other resource in their Pod.

Initial ACP Policies

When a Pod is created, like any other Pod resource, an Access Control Resource (ACR) is also created for the Pod Root. The ACR is initialized with the default ACP policies for the Pod Owner and for Access Grant enablement:

• Initial Pod Owner policies give the Pod Owner read and write access to the Pod. These policies also specify a client matcher as well if the Authorization Service’s configuration for the initial client allow list is set:

  • INRUPT_AUTHORIZATION_DEFAULT_ACR_CLIENT_ID_ALLOW_LIST or if that is unset,

  • INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST .

Allow List is Set

ESS uses the values in its Authorization Service’s

INRUPT_AUTHORIZATION_DEFAULT_ACR_CLIENT_ID_ALLOW_LIST (at the time of Pod creation) to create the client matcher for the initial ACP policies. If the configuration is unset, ESS uses the values in its Authorization Service’s INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST (at the time of Pod creation).

Using the value of the Pod owner’s WebID and an initial client allow list, ESS creates the initial policies of the form:

If allOf(AgentMatcher and ClientMatcher) evaluates to true, Then allow (Read and Write).

Specifically, ESS creates:

Policy 1 for the Pod Root: If the agent matches the Pod owner’s WebID, and if the client application’s Client ID has a match in the initial client allow list, allow Read and Write access.

Policy 2 for the Pod Root’s Initial Member Policies: If the agent matches the Pod owner’s WebID, and if the client application’s Client ID has a match in the initial client allow list, allow Read and Write access.

For more information on a Container’s Member Policies, see Member Policies.

Allow List is Not Set

ESS uses the values in its Authorization Service’s

INRUPT_AUTHORIZATION_DEFAULT_ACR_CLIENT_ID_ALLOW_LIST (at the time of Pod creation) to create the client matcher for the initial ACP policies. If the configuration is unset, ESS uses the values in its Authorization Service’s INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST (at the time of Pod creation).

If the initial client allow list is empty (when creating the policy), ESS uses the value of the Pod owner’s WebID to create initial policies of the form:

If allOf(AgentMatcher) evaluates to true, Then allow (Read and Write).

Specifically, ESS creates:

Policy 1 for the Pod Root: If the agent matches the Pod owner’s WebID, allow Read and Write access.

Policy 2 for the Pod Root’s Initial Member Policies: If the agent matches the Pod owner’s WebID, allow Read and Write access.

For more information on a Container’s Member Policies, see Member Policies.

Disambiguation

Both Authorization Service and Pod Storage Service have a INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST setting.

Only the Authorization Service setting affects which clients are allowed. The Pod Storage Service is for Discovery purposes only.

• Initial Access Grant Enablement policies allow the use of Access Grants that grant read/write/append access to the Pod resources.

  If allOf(VC Matcher) evaluates to true, Then allow (Read and Write and Append).

  Specifically, ESS creates: Policy 3 for the Pod Root: If a presented VC matches the specified type, allow its use for Read, Write, and Append access. Policy 4 for the Pod Root’s Initial Member Policies: If a presented VC matches the specified type, allow its use for Read, Write, and Append access. See also INRUPT_AUTHORIZATION_DEFAULT_ACR_ACCESS_GRANTS_ALLOWED_MODES.

Important

The policies only enable the use of Access Grants for the allowed access modes. To determine the access for an agent using an access grant, ESS uses the intersection of:

• The allowed access specified by the policy, and

• The granted access specified in the Access Grant (for the resource specified in the Access Grant).

Note A Pod’s initial Policies are set when the Pod is provisioned. As such, updates to the various INRUPT_AUTHORIZATION_DEFAULT_ACR_* options do not affect existing Pods.

That is, once a Pod’s initial policies have been created, changes to the various INRUPT_AUTHORIZATION_DEFAULT_ACR_* options are not reflected in that Pod’s policies.

Provisioning Endpoints

Create a New Pod

The ESS Pod provisioning service provides an endpoint that client applications can use to create new Pods.

Important Access to this endpoint requires users to be authenticated.

The following configurations, if set, may affect the behavior of this endpoint:

• INRUPT_JWT_ISSUER_ALLOW_LIST

• INRUPT_JWT_ISSUER_DENY_LIST

• INRUPT_STORAGE_MAX_PODS_PER_OWNER

To create a new Pod (and the extended profile resource), a client will issue an authenticated POST request to the endpoint.

Method:	POST
Endpoint:	https://provision.{ESS domain}/
Body:	N/A
Content-Type:	N/A

Upon successful creation (status 201 ), the endpoint returns a Location header with the location of the new Pod. In addition, the response contains a JSON payload with information about the newly created Pod:

{
   "@context":{
      "id":"@id",
      "storage":{
         "@type":"@id",
         "@id":"http://www.w3.org/ns/pim/space#storage"
      },
      "profile":{
         "@type":"@id",
         "@id":"http://xmlns.com/foaf/0.1/isPrimaryTopicOf"
      }
   },
   "id":"{WebID}",
   "profile":"https://storage.{ESS Domain}/{Root Container}/profile",
   "storage":"https://storage.{ESS Domain}/{Root Container}/"
}

Field	Description
@context	Contains the following context for Pod information fields: { "id":"@id", "storage":{ "@type":"@id", "@id":"http://www.w3.org/ns/pim/space#storage" }, "profile":{ "@type":"@id", "@id":"http://xmlns.com/foaf/0.1/isPrimaryTopicOf" } }
id	The WebID of the authenticated user for whom the Pod has been created.
profile	The URL of an extended profile resource stored on the Pod. The URL has the form https://storage.{ESS Domain}/{Root Container}/profile. Note: The extended profile resource is separate from the public WebID Profile Document. As with any resource in a user’s Pod, the extended profile resource is private by default.
storage	The URL root of the newly created Pod. The URL has the form https://storage.{ESS Domain}/{Root Container}.

This payload can be used to update the WebID Profile with the Pod information.

List Pods for a User

The ESS Pod provisioning service provides an endpoint that client applications can use to list a user’s Pods.

Important Access to this endpoint requires users to be authenticated.

To list Pods for the logged in user, a client can issue an authenticated GET request to the endpoint.

Method:	GET
Endpoint:	https://provision.{ESS domain}/list
Body:	N/A
Content-Type:	N/A

The endpoint returns an array of the unique Root Containers (relative to the Storage base URL), prefixed with a slash “/”; e.g.,

[
  "/973ef337-ce21-4762-975b-671ac6ebc180/",
  "/e3fefa9f-4fe0-4e4c-a5b6-81be0f12fe9c/"
]

Using the appropriate programming language URL builder/constructor, the client can construct the Pod URL using the Storage base URL value (for example, https://storage.{ESS domain} ) and the returned Root Containers.

To determine the base URL value, see INRUPT_STORAGE_HTTP_BASE_URL.

Configuration

As part of the installation process, Inrupt provides base Kustomize overlays and associated files that require deployment-specific configuration inputs.

The following configuration options are available for the service and may be set as part of updating the inputs for your deployment. The Inrupt-provided base Kustomize overlays may be using updated configuration values that differ from the default values.

Provision Options

INRUPT_STORAGE_HTTP_BASE_URL

The base URL of the storage service.

Important

• The value requires a trailing slash / ; e.g., https://storage.{ESS_DOMAIN}/ .

• Ensure that Pod Provision Service’s INRUPT_STORAGE_HTTP_BASE_URL value is consistent with the Pod Storage Service’s INRUPT_STORAGE_HTTP_BASE_URL value.

INRUPT_STORAGE_MAX_PODS_PER_OWNER

Default : 10

For Pod Provision Service Only

The maximum number of Pods owned by a specific WebID.

Important

The INRUPT_STORAGE_MAX_PODS_PER_OWNER value must equal value must equal Authorization Service’s INRUPT_AUTHORIZATION_MAX_POD_COUNT value. When changing the INRUPT_STORAGE_MAX_PODS_PER_OWNER value, ensure you also update INRUPT_AUTHORIZATION_MAX_POD_COUNT to the same value.

Solid-OIDC Issuer Configuration Options

Note Whitespaces are preserved when parsing comma-delimited lists (i.e., the parsed string values are not trimmed). For example, when parsed, "value1, value2,value3 " results in "value1" , " value2" , "value3 " .

INRUPT_JWT_ALLOWED_SIGNATURE_ALGORITHMS

Default : ES256, RS256

A comma-separated list that specifies the allowed encryption algorithms used to sign ID tokens.

INRUPT_JWT_ISSUER_ALLOW_LIST

A comma-separated list of trusted issuers of Solid-OIDC tokens.

• If unset, the service accepts Solid-OIDC tokens from all issuers with the exception of those in the INRUPT_JWT_ISSUER_DENY_LIST .

• If set, the service accepts only the Solid-OIDC tokens from the issuers in the list with the following exception:

  • If an issuer is in both INRUPT_JWT_ISSUER_ALLOW_LIST and INRUPT_JWT_ISSUER_DENY_LIST , the INRUPT_JWT_ISSUER_DENY_LIST supersedes the INRUPT_JWT_ISSUER_ALLOW_LIST and the issuer is not accepted by ESS.

See also INRUPT_JWT_ISSUER_DENY_LIST.

Tip

If your application, such as a start app, provisions the Pod and updates the WebID with the provisioned Pod information, ensure that the WebID service’s INRUPT_JWT_ISSUER_ALLOW_LIST overlaps with the INRUPT_JWT_ISSUER_ALLOW_LIST value set for this service.

INRUPT_JWT_ISSUER_DENY_LIST

A comma-separated list of disallowed issuers of Solid-OIDC tokens.

• If unset, the service accepts Solid-OIDC tokens from all issuers unless INRUPT_JWT_ISSUER_ALLOW_LIST is set, in which case, the service only accepts tokens from those in the INRUPT_JWT_ISSUER_ALLOW_LIST .

• If set, the service disallows the Solid-OIDC tokens from the issuers in the list. If INRUPT_JWT_ISSUER_ALLOW_LIST is also set, issuers not in the INRUPT_JWT_ISSUER_ALLOW_LIST are also disallowed.

Logging Configuration

QUARKUS_LOG_LEVEL

Default : INFO

Logging level.

Kafka Configuration

Tip See also ESS’ Kafka Configuration.

INRUPT_KAFKA_AUDITV1EVENTSENCRYPTED_CIPHER_PASSWORD

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsencrypted topic.

INRUPT_KAFKA_AUDITV1EVENTSPRODUCERENCRYPTED_CIPHER_PASSWORD

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsproducerencrypted topic.

INRUPT_KAFKA_SOLIDRESOURCE_CIPHER_PASSWORD

The symmetric key to use when encrypting messages (see MP_MESSAGING_OUTGOING_SOLIDRESOURCE_VALUE_SERIALIZER).

KAFKA_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers for use by ESS services, including this service.

Setting KAFKA_BOOTSTRAP_SERVERS configures ESS to use the same Kafka instance(s) for all its Kafka message channels (e.g., solidresource and auditv1out message channels). The Pod management services use the solidresource and auditv1out message channels.

Note Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

To use a different Kafka instance for the solidresource and auditv1out channels, use MP_MESSAGING_OUTGOING_SOLIDRESOURCE_BOOTSTRAP_SERVERS and MP_MESSAGING_OUTGOING_AUDITV1OUT_BOOTSTRAP_SERVERS instead.

See also ESS’ Kafka Configuration.

MP_MESSAGING_OUTGOING_AUDITV1OUT_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers used for the outgoing audit v1 messages.

These messages are sent over the auditv1out message channel .

Note To configure ESS to use the same Kafka instances for all its Kafka message channels, use KAFKA_BOOTSTRAP_SERVERS option instead. Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

MP_MESSAGING_OUTGOING_SOLIDRESOURCE_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers used for the outgoing resource notification messages.

These messages are sent over the solidresource message channel .

Note To configure ESS to use the same Kafka instances for all its Kafka message channels, use KAFKA_BOOTSTRAP_SERVERS option instead. Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

MP_MESSAGING_OUTGOING_SOLIDRESOURCE_VALUE_SERIALIZER

Default : org.apache.kafka.common.serialization.StringSerializer

The serializer used for the notification messages the service sends to Kafka.

Supported values are:

• org.apache.kafka.common.serialization.StringSerializer

• When set to this value, notification messages sent to Kafka are unencrypted. Services that consume these messages (e.g.,WebSocket Notification Service) will need to set their MP_MESSAGING_INCOMING_SOLIDRESOURCE_VALUE_DESERIALIZER to the corresponding deserializer value org.apache.kafka.common.serialization.StringDeserializer.

• com.inrupt.components.kafka.encryption.EncryptMessageSerializer

• When set to this value, notification messages sent to Kafka are encrypted. Services that consume these encrypted messages (e.g.,WebSocket Notification Service) will need to set their MP_MESSAGING_INCOMING_SOLIDRESOURCE_VALUE_DESERIALIZER configuration to the corresponding deserializer valuecom.inrupt.components.kafka.encryption.DecryptMessageDeserializer.

AWS Options

INRUPT_STORAGE_S3_BUCKET_NAME

Default : inrupt.ess.storage

The name of the S3 bucket used for storage.

QUARKUS_S3_AWS_CREDENTIALS_STATIC_PROVIDER_ACCESS_KEY_ID

AWS Access key id.

QUARKUS_S3_AWS_CREDENTIALS_STATIC_PROVIDER_SECRET_ACCESS_KEY

AWS Secret access key.

QUARKUS_S3_AWS_REGION

An Amazon Web Services region that hosts the S3 Bucket.

QUARKUS_S3_ENDPOINT_OVERRIDE

Override S3 endpoint URL.

OpenTelemetry Options

QUARKUS_OTEL_EXPORTER_OTLP_ENDPOINT

The URL to which the OpenTelemetry exporter sends data.

QUARKUS_OTEL_TRACES_SAMPLER_ARG

Default : 0.0d

A double compatible value between 0.0d and 1.0d to determine the sampling rate of the OpenTelemetry exporter. A value of 0.0d results in disabling OpenTelemetry exports.

Configuration Logging

ESS services log their startup configuration.

INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW

Default : inrupt,smallrye.jwt.expiration.grace,mp.jwt.verify.clock.skew,smallrye.jwt.always-check-authorization,smallrye.jwt.token.decryption.kid,smallrye.jwt.token.schemes,smallrye.jwt.require.named-principal,smallrye.jwt.time-to-live,smallrye.jwt.jwks.refresh-interval,smallrye.jwt.jwks.forced-refresh-interval,smallrye.jwt.required.claims,mp.jwt.verify.audiences

A comma-separated list of configuration property prefixes ( case-sensitive ) that determine which configurations are logged:

• If the list is empty, NO configuration property is logged.

• If a configuration property starts with a listed prefix ( case-sensitive ), the configuration property and its value are logged unless the configuration also matches a prefix in INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY (which acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW list). As such, if the configuration matches prefix in both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY , the INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY takes precedence and the configuration is not logged. For example, if inrupt. is an allow prefix, but inrupt.kafka. is a deny prefix, all configurations that start with inrupt.kafka. are excluded from the logs.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Tip To avoid allowing more than desired configurations, specify as much of the prefix as possible. If the prefix specifies the complete prefix term, include the term delineator. For example:

• If using dot-notation, if you want to match configuration properties of the form foobar.<xxxx>... , specify foobar. (including the dot . ) instead of, for example, foo or foobar .

• If using converted form, if you want to match configuration properties of the form FOOBAR_<XXXX>... , specify FOOBAR_ (including the underscore _ ) instead of, for example, FOO or FOOBAR .

INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY

Default : inrupt.kafka

A comma-separated list of configuration name prefixes ( case-sensitive ) that determines which configurations (that would otherwise match the INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW ) are not logged. That is, INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW . For example:

• If foobar. is an allowed prefix, to suppress foobar.private.<anything> , you can specify foobar.private. to the deny list.

• If foobar. is not an allowed prefix, no property starting with foobar. is logged. As such, you do not need to specify foobar.private to the deny list.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Logging Redaction

INRUPT_LOGGING_REDACTION_NAME_ACTION

Default : REPLACE

Type of the redaction to perform. Supported values are:

Action	Description
REPLACE	Default. Replaces the matching text with a specified replacement.
PLAIN	Leaves the matching field unprocessed. Only available if the redaction target is a field (i.e., INRUPT_LOGGING_REDACTION_{NAME}_FIELD)
DROP	Suppresses the matching field. Only available if the redaction target is a field (i.e., INRUPT_LOGGING_REDACTION_{NAME}_FIELD).
PRIORITIZE	Changes the log level of the matching message.
SHA256	Replaces the matching text with its hash.

• If the action is REPLACE ( default ), see also INRUPT_LOGGING_REDACTION_{NAME}_REPLACEMENT .

• If the action is to PRIORITIZE , see also INRUPT_LOGGING_REDACTION_{NAME}_LEVEL .

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_ENABLED

Default : true

A boolean that determines whether the redaction configurations with the specified INRUPT_LOGGING_REDACTION_{NAME}_ prefix is enabled.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_EXCEPTION

Fully qualified name of the exception class to match in the log messages (includes inner exception). Configure to target an exception message class.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_FIELD

Exact name of the field to match in the log messages. Configure to target a specific log message field for redaction.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_LEVEL

A new log level to use for the log message if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is PRIORITIZE .

INRUPT_LOGGING_REDACTION_NAME_PATTERN

A regex (see Java regex pattern ) to match in the log messages. Configure to target log message text that matches a specified pattern.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_REPLACEMENT

Replacement text to use if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is REPLACE .

If unspecified, defaults to [REDACTED] .

For more information on log redaction, see Logging Redaction.

Application-Defined Metadata Propagation

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW

A comma-separated list of application-defined properties that can be included in the associated audit events (unless specified in the corresponding INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY

A comma-separated list of application-defined properties to exclude from the associated audit messages. This setting takes precedence over INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_LOGGING_REQUEST_METADATA_ALLOW

A comma-separated list of application-defined properties that can be included in the associated log messages (unless specified in the corresponding INRUPT_LOGGING_REQUEST_METADATA_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_LOGGING_REQUEST_METADATA_DENY

A comma-separated list of application-defined properties to exclude from the associated log messages. This setting takes precedence over INRUPT_LOGGING_REQUEST_METADATA_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW

A comma-separated list of non-baggage request headers to add to the baggage (unless specified in the corresponding INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY ); i.e., include these non-baggage request headers as application-defined properties.

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY

A comma-separated list of non-baggage request headers to exclude from being added to the baggage ; i.e., excludes these headers as application-defined properties. This setting takes precedence over INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW .

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match (and exclude) x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_OVERRIDES

A flag that determines ESS behavior when metadata property is defined both as a header and as a baggage entry:

• If true , ESS updates/overrides the baggage entry with the header value.

• If false (the default), ESS keeps the baggage entry.

For details, Duplicate Property Definition .

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW

A comma-separated list of application-defined properties that can return as response headers (unless specified in the corresponding INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

• To return a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

• You may need to update QUARKUS_HTTP_CORS_EXPOSED_HEADERS to extend the list of CORS-safelisted response headers .

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY

A comma-separated list of application-defined properties to exclude from returning as response headers. This setting takes precedence over INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

.

Purge Configuration

The Storage service contains user data, and as such it can be purged upon user request. See the Purger Application documentation for more information about the data being purged.

INRUPT_PURGE_BATCH_SIZE

Default : 100

The maximum number of resources that the purge task will purge in each batch. This must be a non-zero, positive integer.

Added in version 2.3.0

INRUPT_PURGE_CLEANUP_TASK_EVERY

Default : PT5H

Frequency at which a task goes through stored purge statuses to clear any which are beyond their retention window.

Added in version 2.3.0

INRUPT_PURGE_IN_PROGRESS_TIMEOUT_SECONDS

Default : 120

Timeout after which an ongoing purge task is considered stale. Stale tasks are picked up by an ESS background process to be taken to completion. By keeping track of a purge task’s state (active or stale) the service can ensure that a purge which was started will eventually reach completion, even if the system is disrupted whilst the asynchronous purge process is ongoing.

Added in version 2.3.0

INRUPT_PURGE_PROCESS_TASK_EVERY

Default : PT5M

Frequency at which an ESS background process goes through ongoing purges to pick up the incomplete stale ones. See INRUPT_PURGE_IN_PROGRESS_TIMEOUT_SECONDS for additional details.

Added in version 2.3.0

INRUPT_PURGE_STATUS_RETENTION_WINDOW

Default : P2D

Duration after which a purge task status will be cleared from storage. The purge task contains some Personally Identifying Data (such as the WebID), so ensuring it is cleared after a purge is required for compliance.

Added in version 2.3.0

INRUPT_PURGE_SYSTEM_STATUS_ROOT

Default : /system/purge/status/

The path for storing purge statuses as system resources.

Added in version 2.3.0

Additional Information

See also Quarkus Configuration Options .