Pod Storage Service

ESS' Pod Storage Service hosts the Pods created by the Pod provisioning service and is responsible for reading and writing the resources stored in the Pod.

The Pod URL has the following pattern:

https://storage.{ESS Domain}/{Unique Root Container}/

Prior to version 2.0, ESS Pods had the URL of the form https://{ESS Domain}/{username}/

Pod Resources

ESS Pods supports storing different types of Solid Resources, including Containers, Resources, and RDF Resources.

Access

For access to the Pod resources, ESS' Pod Storage service supports the use of the following tokens:

• UMA token

• Solid-OpenID Connect (OIDC) access token.

See also:

• Pod Storage UMA Configuration

• Solid-OIDC Issuer Configuration Options

Discovery

ESS provides Pod storage service (and related) metadata at the following .well-known/solid URI:

https://storage.{ESS Domain}/.well-known/solid

Its Response.body returns Resource Description Framework (RDF) statements. Depending on your configuration, the response can include information about:

• List of applications that can perform read and write operations the Access Control Resources with the following caveat:

Disambiguation The list displays the value of Pod Storage Service's INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST configuration value, which is for discoverability purposes only.

The actual configuration that determines which applications can access the ACR is the Authorization Service's INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST.

As such, if the two lists are not in sync, the returned list from Pod Storage Service may not accurately reflect the trusted apps.

• Maximum number of Pods allowed per Agent.

• Notification Gateway endpoint.

• Provision service endpoint.

• QPF service endpoint.

@prefix solid: <http://www.w3.org/ns/solid/terms#> .
[ a                          solid:DiscoveryDocument ;
  <http://www.w3.org/ns/auth/acl#trustedApp>
          <https://inrupt.com> ;
  solid:maxPodsPerOwner      10 ;
  solid:notificationGateway  <https://notification.{ESS DOMAIN}.com/> ;
  solid:provision            <https://provision.{ESS DOMAIN}.com/>;
  solid:qpf                  <https://fragments.{ESS DOMAIN}.com/
] .

Prune/Hard Delete Feature

ESS includes a Prune feature to hard delete (i.e., permanently delete):

• soft-deleted resources (i.e., files marked as deleted) and

• orphan data (i.e., data that are no longer referenced by metadata).

For more information on soft-deleted resources and orphan data, see CRUD Operations.

Prune CronJobs

Prune consists of two Kubernetes CronJobs:

• One to delete soft-deleted resources.

• One to delete orphan data.

Pruning Soft-Deleted Resources

Prune uses the following process to delete soft-deleted resources:

1. To find resources to delete, Prune queries for metadata entries that have been soft-deleted (i.e., marked as deleted) for longer than the configured INRUPT_STORAGE_PRUNE_RETENTION_WINDOW . These are "prunable" resources. Prune uses the INRUPT_STORAGE_PRUNE_PRUNABLE_BATCH_SIZE to limit the number of results.

2. Using the identifiers (part of the metadata) from the query results,

3. Prune deletes the resources.

4. Prune deletes the associated metadata.

To configure, see Modify Prune Configuration.

See also Administration: Pruning.

Pruning Orphan Data

Prune uses the following process to delete orphan data:

1. Prune starts by randomly selecting resource data identifiers. Prune uses the INRUPT_STORAGE_PRUNE_ORPHAN_BATCH_SIZE to limit the number of selected identifiers.

2. For the selected resource data identifiers, Prune queries for corresponding metadata to find those identifiers without corresponding metadata. Prune uses the INRUPT_STORAGE_PRUNE_PRUNABLE_BATCH_SIZE to limit the number of results.

3. Prune deletes those resource data whose identifiers did not have corresponding metadata.

To configure, see Modify Prune Configuration.

See also Administration: Pruning.

Storage Metrics

ESS includes a Storage Metrics feature to gather the following metrics:

• The total number of Pods

• The number of Pods that have been "Created" (where the provision has been confirmed)

• The number of Pods that have been "Deleted"(marked for deletion; i.e., soft-deleted).

The Storage Metrics is run as a Kubernetes CronJobs.

To modify the schedule, see Modify Storage Metrics Schedule.

See also Administration: Storage Metrics.

Configuration

As part of the installation process, Inrupt provides base Kustomize overlays and associated files that require deployment-specific configuration inputs.

The following configuration options are available for the service and may be set as part of updating the inputs for your deployment. The Inrupt-provided base Kustomize overlays may be using updated configuration values that differ from the default values.

Pod Storage Pruning Options

Note Whitespaces are preserved when parsing comma-delimited lists (i.e., the parsed string values are not trimmed). For example, when parsed, "value1, value2,value3 " results in "value1" , " value2" , "value3 " .

COM_INRUPT_STORAGE_METADATA_JDBC_CONNECTIONLIMITER_OPENCONNECTION_TIMEOUT_VALUE

Default : 5000

Optional. The maximum amount of milliseconds Prune operations' connection to the metadata database can remain open.

Adjust as needed to accommodate changes to:

• INRUPT_STORAGE_PRUNE_PRUNABLE_BATCH_SIZE

• INRUPT_STORAGE_PRUNE_RETENTION_WINDOW

• INRUPT_STORAGE_PRUNE_ORPHAN_BATCH_SIZE

INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW

Default : inrupt,quarkus.s3.aws.region

A comma-separated list of configuration property prefixes (case-sensitive) that determine which configurations are logged:

• If the list is empty, NO configuration property is logged.

• If a configuration property starts with a listed prefix (case-sensitive), the configuration property and its value are logged unless the configuration also matches a prefix in INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY (which acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW list). As such, if the configuration matches prefix in both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY, the INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY takes precedence and the configuration is not logged. For example, if inrupt. is an allow prefix, but inrupt.kafka. is a deny prefix, all configurations that start with inrupt.kafka. are excluded from the logs.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Tip

To avoid allowing more than desired configurations, specify as much of the prefix as possible. If the prefix specifies the complete prefix term, include the term delineator. For example:

• If using dot-notation, if you want to match configuration properties of the form foobar.<xxxx>... , specify foobar. (including the dot . ) instead of, for example, foo or foobar .

• If using converted form, if you want to match configuration properties of the form FOOBAR_<XXXX>... , specify FOOBAR_ (including the underscore _ ) instead of, for example, FOO or FOOBAR .

INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY

Default : inrupt.kafka

A comma-separated list of configuration name prefixes (case-sensitive) that determines which configurations (that would otherwise match the INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW) are not logged. That is, INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW.

For example:

• If foobar. is an allowed prefix, to suppress foobar.private.<anything> , you can specify foobar.private. to the deny list.

• If foobar. is not an allowed prefix, no property starting with foobar. is logged. As such, you do not need to specify foobar.private to the deny list.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

INRUPT_STORAGE_PRUNE_ORPHAN_BATCH_SIZE

An integer that limits the number of resource data identifiers selected by Prune during orphan data cleanup.

Important

For Prune cron job that prunes soft-deleted resources, set to 0 .

An increase in the batch size may require a corresponding increase in COM_INRUPT_STORAGE_METADATA_JDBC_CONNECTIONLIMITER_OPENCONNECTION_TIMEOUT_VALUE .

INRUPT_STORAGE_PRUNE_PRUNABLE_BATCH_SIZE

An integer that limits the number of results returned when querying the metadata.

Important

For Prune cron job that prunes orphan data, set to 0 .

An increase in the batch size may require a corresponding increase in COM_INRUPT_STORAGE_METADATA_JDBC_CONNECTIONLIMITER_OPENCONNECTION_TIMEOUT_VALUE .

INRUPT_STORAGE_PRUNE_RETENTION_WINDOW

The minimum amount of time (specified in a format supported by Java Duration.parse() method; e.g., PT23H for 23 hours) that resources have been soft-deleted (marked as deleted) before they become eligible for pruning . That is, resources that have been soft-deleted for longer than the specified time can be selected for hard deletion by Prune ; i.e., these are "prunable" resources.

This configuration does not affect the pruning of orphaned data.

An increase in the retention window value may require a corresponding increase in COM_INRUPT_STORAGE_METADATA_JDBC_CONNECTIONLIMITER_OPENCONNECTION_TIMEOUT_VALUE .

To configure Prune, see Modify Prune Configuration

Pod Storage Metrics Options

INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW

Default : inrupt,quarkus.s3.aws.region

A comma-separated list of configuration property prefixes (case-sensitive) that determine which configurations are logged:

• If the list is empty, NO configuration property is logged.

• If a configuration property starts with a listed prefix (case-sensitive), the configuration property and its value are logged unless the configuration also matches a prefix in INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY (which acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW list). As such, if the configuration matches prefix in both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY, the INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY takes precedence and the configuration is not logged. For example, if inrupt. is an allow prefix, but inrupt.kafka. is a deny prefix, all configurations that start with inrupt.kafka. are excluded from the logs.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar.), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Tip

To avoid allowing more than desired configurations, specify as much of the prefix as possible. If the prefix specifies the complete prefix term, include the term delineator. For example:

• If using dot-notation, if you want to match configuration properties of the form foobar.<xxxx>... , specify foobar. (including the dot . ) instead of, for example, foo or foobar .

• If using converted form, if you want to match configuration properties of the form FOOBAR_<XXXX>... , specify FOOBAR_ (including the underscore _ ) instead of, for example, FOO or FOOBAR .

INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY

Default : inrupt.kafka

A comma-separated list of configuration name prefixes (case-sensitive) that determines which configurations (that would otherwise match the INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW) are not logged. That is, INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW.

For example:

• If foobar. is an allowed prefix, to suppress foobar.private.<anything> , you can specify foobar.private. to the deny list.

• If foobar. is not an allowed prefix, no property starting with foobar. is logged. As such, you do not need to specify foobar.private to the deny list.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Pod Storage Resource Read Auditing Option

INRUPT_STORAGE_AUDIT_RESOURCE_READ_ENABLED

Default : false

A boolean that determines whether to audit successful read resource events (i.e., successful (GET and HEAD operations on resources).

Set to true to enable, and false to disable.

Important

When auditing of read operations is enabled, the total number of Audit events may increase substantially. Before enabling read operations auditing, consider allocating more compute and network resources to ESS.

See also Enable Resource Read Auditing

Pod Storage UMA Configuration

INRUPT_AUTHZ_AS_URI

The URI of the UMA Authorization Server.

The value must match:

• INRUPT_JWT_AUTHORIZATION_SERVER_ISSUER configuration for the service, and

• INRUPT_UMA_ISSUER configuration for UMA Service

INRUPT_AUTHZ_UMA_ANONYMOUS_ENABLED

Default : false

A boolean flag that determines whether to support anonymous (i.e., unauthenticated) access to resources that have been granted public access.

Important

If set to true (i.e., allow unauthenticated access to resources that have been granted public access), update the service's Content-Security-Policy (default worker-src 'none' ) to include Content-Security-Policy (CSP) sandbox , such as Content-Security-Policy: worker-src 'none'; sandbox allow-scripts .

You can use Quarkus HTTP configuration property to add the CSP header setting; namely QUARKUS_HTTP_HEADERS__CONTENT_SECURITY_POLICY__VALUE .

INRUPT_AUTHZ_UMA_OIDC_ENABLED

Default : false

A boolean flag that determines whether the Pod server supports OIDC access tokens. When set to false , clients will need access tokens from the associated UMA server.

INRUPT_JWT_AUTHORIZATION_SERVER_ISSUER

The URI of the UMA token issuer.

The value must match INRUPT_AUTHZ_AS_URI .

INRUPT_JWT_AUTHORIZATION_SERVER_JWKS

The JWKS endpoint of the INRUPT_JWT_AUTHORIZATION_SERVER_ISSUER.

SMALLRYE_JWT_ENCRYPT_KEY_ID

The key id of the JWK key used to encrypt the ticket for the UMA Authorization Server. Required if using UMA.

SMALLRYE_JWT_ENCRYPT_KEY_LOCATION

The location of the JWK key used to encrypt the ticket for the UMA Service.

This should be configured to the SMALLRYE_JWT_SIGN_KEY_LOCATION on the UMA Service

Pod Storage Options

INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST

Default: https://inrupt.com

Comma-delimited list of Client IDs that are displayed in /.well-known/solid as the Client IDs of trusted applications. Trusted applications can perform read and write operations on the Access Control Resources.

Disambiguation Both Authorization Service and Pod Storage Service have an INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST setting.

Only the Authorization Service setting affects which clients are allowed. The Pod Storage Service is for Discovery purposes only.

The list should reflect the values set in the Authorization Service's INRUPT_AUTHORIZATION_CLIENT_ID_ALLOW_LIST since the authorization server's configuration actually determines what clients are the trusted applications. That is, the Pod service's configuration is for discoverability purposes only.

See Set Authorization Client Allow List

INRUPT_STORAGE_HTTP_BASE_URL

The base URL of the storage service. This is mainly for use by supporting services like Pod Provisioning service.

Important

• The value requires a trailing slash / ; e.g., https://storage.{ESS_DOMAIN}/ .

• Ensure that Pod Storage Service's INRUPT_STORAGE_HTTP_BASE_URL value is consistent with the Pod Provision Service's INRUPT_STORAGE_HTTP_BASE_URL value.

INRUPT_STORAGE_HTTP_CACHE_CONTROL_MAX_AGE

Default : 0

The max-age directive value on the Cache-Control header.

For more information of Cache-Control directives, see https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Cache-Control .

Solid-OIDC Issuer Configuration Options

INRUPT_JWT_ALLOWED_SIGNATURE_ALGORITHMS

Default : ES256, RS256

A comma-separated list that specifies the allowed encryption algorithms used to sign ID tokens.

INRUPT_JWT_ISSUER_ALLOW_LIST

A comma-separated list of trusted issuers of Solid-OIDC tokens.

• If unset, the service accepts Solid-OIDC tokens from all issuers with the exception of those in the INRUPT_JWT_ISSUER_DENY_LIST .

• If set, the service accepts only the Solid-OIDC tokens from the issuers in the list with the following exception:

  • If an issuer is in both INRUPT_JWT_ISSUER_ALLOW_LIST and INRUPT_JWT_ISSUER_DENY_LIST , the INRUPT_JWT_ISSUER_DENY_LIST supersedes the INRUPT_JWT_ISSUER_ALLOW_LIST and the issuer is not accepted by ESS.

See also INRUPT_JWT_ISSUER_DENY_LIST .

Tip Ensure that ESS UMA service' INRUPT_JWT_ISSUER_ALLOW_LIST is consistent with the INRUPT_JWT_ISSUER_ALLOW_LIST value set for this service.

INRUPT_JWT_ISSUER_DENY_LIST

A comma-separated list of disallowed issuers of Solid-OIDC tokens.

• If unset, the service accepts Solid-OIDC tokens from all issuers unless INRUPT_JWT_ISSUER_ALLOW_LIST is set, in which case, the service only accepts tokens from those in the INRUPT_JWT_ISSUER_ALLOW_LIST .

• If set, the service disallows the Solid-OIDC tokens from the issuers in the list. If INRUPT_JWT_ISSUER_ALLOW_LIST is also set, issuers not in the INRUPT_JWT_ISSUER_ALLOW_LIST are also disallowed.

Tip Ensure that ESS' UMA service's INRUPT_JWT_ISSUER_DENY_LIST is consistent with the INRUPT_JWT_ISSUER_DENY_LIST value set for this service.

JSON-LD Context Configuration Options

INRUPT_JSONLD_CONTEXT_ALLOW_LIST

A comma-delimited list of trusted JSON-LD context URIs allowed to be dereferenced.

INRUPT_JSONLD_CONTEXT_DENY_LIST

A deny-list of JSON-LD context URIs. URIs listed in this configuration are prevented from being dereferenced.

See also: INRUPT_JSONLD_CONTEXT_ALLOW_LIST .

Logging Configuration

QUARKUS_LOG_LEVEL

Default : INFO

Logging level.

Kafka Configuration

Tip See also ESS’ Kafka Configuration

INRUPT_KAFKA_AUDITV1EVENTSENCRYPTED_CIPHER_PASSWORD

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsencrypted topic.

INRUPT_KAFKA_AUDITV1EVENTSPRODUCERENCRYPTED_CIPHER_PASSWORD

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsproducerencrypted topic.

INRUPT_KAFKA_SOLIDRESOURCE_CIPHER_PASSWORD

The symmetric key to use when encrypting messages (see MP_MESSAGING_OUTGOING_SOLIDRESOURCE_VALUE_SERIALIZER ).

KAFKA_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers for use by ESS services, including this service.

Setting KAFKA_BOOTSTRAP_SERVERS configures ESS to use the same Kafka instance(s) for all its Kafka message channels (e.g., solidresource and auditv1out message channels). The Pod management services use the solidresource and auditv1out message channels.

Note Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

To use a different Kafka instance for the solidresource and auditv1out channels, use MP_MESSAGING_OUTGOING_SOLIDRESOURCE_BOOTSTRAP_SERVERS and MP_MESSAGING_OUTGOING_AUDITV1OUT_BOOTSTRAP_SERVERS instead.

See also ESS’ Kafka Configuration

MP_MESSAGING_OUTGOING_AUDITV1OUT_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers used for the outgoing audit v1 messages.

These messages are sent over the auditv1out message channel .

Note To configure ESS to use the same Kafka instances for all its Kafka message channels, use KAFKA_BOOTSTRAP_SERVERS option instead. Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

MP_MESSAGING_OUTGOING_SOLIDRESOURCE_BOOTSTRAP_SERVERS

Default : localhost:9092

Comma-delimited list of Kafka broker servers used for the outgoing resource notification messages.

These messages are sent over the solidresource message channel .

Note To configure ESS to use the same Kafka instances for all its Kafka message channels, use KAFKA_BOOTSTRAP_SERVERS option instead. Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS .

MP_MESSAGING_OUTGOING_SOLIDRESOURCE_VALUE_SERIALIZER

Default : org.apache.kafka.common.serialization.StringSerializer

The serializer used for the notification messages the service sends to Kafka.

Supported values are:

• org.apache.kafka.common.serialization.StringSerializerWhen set to this value, notification messages sent to Kafka are unencrypted. Services that consume these messages (e.g., WebSocket Notification Service) will need to set theirMP_MESSAGING_INCOMING_SOLIDRESOURCE_VALUE_DESERIALIZERto the corresponding deserializer valueorg.apache.kafka.common.serialization.StringDeserializer.

• com.inrupt.components.kafka.encryption.EncryptMessageSerializerWhen set to this value, notification messages sent to Kafka are encrypted. Services that consume these encrypted messages (e.g., WebSocket Notification Service) will need to set their MP_MESSAGING_INCOMING_SOLIDRESOURCE_VALUE_DESERIALIZERconfiguration to the corresponding deserializer value com.inrupt.components.kafka.encryption.DecryptMessageDeserializer.

AWS Options

INRUPT_STORAGE_S3_BUCKET_NAME

Default : inrupt.ess.storage

The name of the S3 bucket used for storage.

QUARKUS_S3_AWS_CREDENTIALS_STATIC_PROVIDER_ACCESS_KEY_ID

AWS Access key id.

QUARKUS_S3_AWS_CREDENTIALS_STATIC_PROVIDER_SECRET_ACCESS_KEY

AWS Secret access key.

QUARKUS_S3_AWS_REGION

An Amazon Web Services region that hosts the S3 Bucket.

QUARKUS_S3_ENDPOINT_OVERRIDE

Override S3 endpoint URL.

OpenTelemetry Options

QUARKUS_OTEL_EXPORTER_OTLP_ENDPOINT

The URL to which the OpenTelemetry exporter sends data.

QUARKUS_OTEL_TRACES_SAMPLER_ARG

Default : 0.0d

A double compatible value between 0.0d and 1.0d to determine the sampling rate of the OpenTelemetry exporter. A value of 0.0d results in disabling OpenTelemetry exports.

Configuration Logging

ESS services log their startup configuration.

INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW

Default : inrupt,smallrye.jwt.expiration.grace,mp.jwt.verify.clock.skew,smallrye.jwt.always-check-authorization,smallrye.jwt.token.decryption.kid,smallrye.jwt.token.schemes,smallrye.jwt.require.named-principal,smallrye.jwt.time-to-live,smallrye.jwt.jwks.refresh-interval,smallrye.jwt.jwks.forced-refresh-interval,smallrye.jwt.required.claims,mp.jwt.verify.audiences

A comma-separated list of configuration property prefixes ( case-sensitive ) that determine which configurations are logged:

• If the list is empty, NO configuration property is logged.

• If a configuration property starts with a listed prefix ( case-sensitive ), the configuration property and its value are logged unless the configuration also matches a prefix in INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY (which acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW list). As such, if the configuration matches prefix in both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY , the INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY takes precedence and the configuration is not logged. For example, if inrupt. is an allow prefix, but inrupt.kafka. is a deny prefix, all configurations that start with inrupt.kafka. are excluded from the logs.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Tip

To avoid allowing more than desired configurations, specify as much of the prefix as possible. If the prefix specifies the complete prefix term, include the term delineator. For example:

• If using dot-notation, if you want to match configuration properties of the form foobar.<xxxx>... , specify foobar. (including the dot . ) instead of, for example, foo or foobar .

• If using converted form, if you want to match configuration properties of the form FOOBAR_<XXXX>... , specify FOOBAR_ (including the underscore _ ) instead of, for example, FOO or FOOBAR .

INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY

Default : inrupt.kafka

A comma-separated list of configuration name prefixes ( case-sensitive ) that determines which configurations (that would otherwise match the INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW ) are not logged. That is, INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW . For example:

• If foobar. is an allowed prefix, to suppress foobar.private.<anything> , you can specify foobar.private. to the deny list.

• If foobar. is not an allowed prefix, no property starting with foobar. is logged. As such, you do not need to specify foobar.private to the deny list.

When specifying the prefixes, you can specify the prefixes using one of two formats:

• using dot notation (e.g., inrupt.foobar. ), or

• using the MicroProfile Config environmental variables conversion value (e.g., INRUPT_FOOBAR_ ).

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY .

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW , change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

INRUPT_STORAGE_AUDIT_RESOURCE_READ_ENABLED

Default : false

A boolean that determines whether to audit successful read resource events (i.e., successful (GET and HEAD operations on resources).

Set to true to enable, and false to disable.

Important

When auditing of read operations is enabled, the total number of Audit events may increase substantially. Before enabling read operations auditing, consider allocating more compute and network resources to ESS.

See also Enable Resource Read Auditing

Logging Redaction

INRUPT_LOGGING_REDACTION_NAME_ACTION

Default : REPLACE

Type of the redaction to perform. Supported values are:

Action	Description
REPLACE	Default. Replaces the matching text with a specified replacement.
PLAIN	Leaves the matching field unprocessed. Only available if the redaction target is a field (i.e.,INRUPT_LOGGING_REDACTION_{NAME}_FIELD).
DROP	Suppresses the matching field. Only available if the redaction target is a field (i.e.,INRUPT_LOGGING_REDACTION_{NAME}_FIELD).
PRIORITIZE	Changes the log level of the matching message.
SHA256	Replaces the matching text with its hash.

• If the action is REPLACE ( default ), see also INRUPT_LOGGING_REDACTION_{NAME}_REPLACEMENT .

• If the action is to PRIORITIZE , see also INRUPT_LOGGING_REDACTION_{NAME}_LEVEL .

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_ENABLED

Default : true

A boolean that determines whether the redaction configurations with the specified INRUPT_LOGGING_REDACTION_{NAME}_ prefix is enabled.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_EXCEPTION

Fully qualified name of the exception class to match in the log messages (includes inner exception). Configure to target an exception message class.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_FIELD

Exact name of the field to match in the log messages. Configure to target a specific log message field for redaction.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_LEVEL

A new log level to use for the log message if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is PRIORITIZE .

INRUPT_LOGGING_REDACTION_NAME_PATTERN

A regex (see Java regex pattern ) to match in the log messages. Configure to target log message text that matches a specified pattern.

For more information on log redaction, see Logging Redaction.

INRUPT_LOGGING_REDACTION_NAME_REPLACEMENT

Replacement text to use if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is REPLACE .

If unspecified, defaults to [REDACTED] .

For more information on log redaction, see Logging Redaction.

Application-Defined Metadata Propagation

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW

A comma-separated list of application-defined properties that can be included in the associated audit events (unless specified in the corresponding INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY

A comma-separated list of application-defined properties to exclude from the associated audit messages. This setting takes precedence over INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_LOGGING_REQUEST_METADATA_ALLOW

A comma-separated list of application-defined properties that can be included in the associated log messages (unless specified in the corresponding INRUPT_LOGGING_REQUEST_METADATA_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_LOGGING_REQUEST_METADATA_DENY

A comma-separated list of application-defined properties to exclude from the associated log messages. This setting takes precedence over INRUPT_LOGGING_REQUEST_METADATA_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW

A comma-separated list of non-baggage request headers to add to the baggage (unless specified in the corresponding INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY ); i.e., include these non-baggage request headers as application-defined properties.

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY

A comma-separated list of non-baggage request headers to exclude from being added to the baggage ; i.e., excludes these headers as application-defined properties. This setting takes precedence over INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW .

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match (and exclude) x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_OVERRIDES

A flag that determines ESS behavior when metadata property is defined both as a header and as a baggage entry:

• If true , ESS updates/overrides the baggage entry with the header value.

• If false (the default), ESS keeps the baggage entry.

For details, Duplicate Property Definition

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW

A comma-separated list of application-defined properties that can return as response headers (unless specified in the corresponding INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY ).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

• To return a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

• You may need to update QUARKUS_HTTP_CORS_EXPOSED_HEADERS to extend the list of CORS-safelisted response headers .

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY

A comma-separated list of application-defined properties to exclude from returning as response headers. This setting takes precedence over INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW .

This configuration is case-sensitive to the propagated properties in the baggage.

Tip To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

• Manage Application-Defined Metadata Propagation to configure.

• Application-Defined Metadata for more information.

Additional Information

See also Quarkus Configuration Options