WebID Service#

Starting in version 2.0, ESS introduces a separate service to host and manage WebIDs and the corresponding Profile Documents.

WebID and Profile Document#

According to the WebID draft specification, a WebID is a URL that identifies an agent.

Starting in version 2.0,

  • ESS’ WebID service creates WebIDs of the form:

    https://id.{ESS DOMAIN}/{username}
    
  • The WebID profile document is no longer hosted in the user’s Pod. [1]

Prior to version 2.0, ESS issued WebIDs of the form https://{ESS Domain}/{username}/profile/card#me, which were hosted in the user’s Pod.

WebID Profile Document#

The WebID URL dereferences to the agent’s WebID profile, where the profile is a document that describes the agent.

The ESS WebID service ensures that the WebID Profile document is a valid RDF document. An RDF document is a document whose contents consists of statements that have the following form (also known as a triple):

<subject> <predicate> <object> .

The WebID profile document is a publicly accessible document. [1]

WebID Profile Document Constraints#

ESS enforces the following constraints on the RDF data model in the WebID Profile:

  • The document must contain the following solid:oidcIssuer triple :

    <WebID URL> solid:oidcIssuer <defaultIssuer URL> .
    

    where

    • <WebID URL> is the agent’s WebID

    • <defaultIssuer URL> is the configured INRUPT_WEBID_ISSUER value.

  • For all solid:oidcIssuer triples,

    • The subject must be the agent’s WebID URL.

    • The object must be a valid HTTP(S) URL.

  • If an rdf:type triple is present in the WebID Profile Document, its value must be one of:

    • foaf:Agent

    • foaf:Group

    • foaf:Person

    • foaf:Organization

    where foaf: is the namespace prefix for http://xmlns.com/foaf/0.1/.

    For example,

    <WebID URL> a foaf:Agent.
    
  • For any foaf:isPrimaryTopicOf triples, the object must be an HTTP(S) URL.

  • For any pim:storage triples, the object must be an HTTP(S) URL.

ESS allows any other RDF triples, without constraints, in the WebID profile.

WebID Profile Document Endpoints#

The WebID service provides various endpoints for managing (get, create, replace, add storage info, delete) the WebID profile document.

Authentication and Authorization Requirements#

The operations to create and modify the WebID profile (create, replace, update with storage info, delete) have authentication and authorization requirements:

  • Agents must be authenticated.

  • The agent’s ID token must be issued by an approved issuer. See INRUPT_JWT_ISSUER_ALLOW_LIST for details.

  • Agents can only use approved applications to create and modify their WebID profile. See INRUPT_WEBID_ALLOWED_CLIENT_IDS for details.

  • Agents can only create and modify their own WebID. Specifically, the WebID service checks that the webid claim in the agent’s ID token matches the specified https://id.{ESS DOMAIN}/{username} endpoint.

Fetch a Profile Document#

A client can retrieve the profile associated with a WebID by issuing a GET request to the WebID:

Method:

GET

Endpoint:

https://id.{ESS DOMAIN}/{username}

Accept:

text/turtle

Body:

N/A

Content-Type:

N/A

Tip

Per the WebID draft specification, an HTTP request on the WebID can return a redirect status (303) along with the profile document URL in the Location header.

As such, a client may need to handle the HTTP redirection according to its needs (e.g., follow the redirect automatically or error).

Alternatively, if the profile document URL is the WebID with a file extension (e.g., .ttl, .jsonld), you can issue a GET request directly to the profile document URL.

Upon successful fetch, the response includes a status of 200 OK (including when the client automatically follows the redirect) and the profile document in its body.

Create a Profile Document#

Important

The operation has authentication and authorization requirements. See Authentication and Authorization Requirements.

To create a WebID profile document if one does not already exist for the WebID, issue a POST request to the WebID:

Method:

POST

Endpoint:

https://id.{ESS DOMAIN}/{username}

Body:

N/A

Content-Type:

N/A

Note

If the WebID profile document already exists, the POST request returns a 400 Bad Request error.

Upon successful creation of a WebID profile document, the response includes a status of 201 Created. The newly created WebID profile document has the following content:

@prefix foaf: <http://xmlns.com/foaf/0.1/>.
@prefix solid: <http://www.w3.org/ns/solid/terms#>.
@prefix rdfs: <http://www.w3.org/2000/01/rdf-schema#>.

<https://id.{ESS DOMAIN}/{username}> a foaf:Agent;
    solid:oidcIssuer <{WEBID_ISSUER}/>.

Where the {WEBID_ISSUER} is the configured INRUPT_WEBID_ISSUER value.

Replace a Profile Document#

Important

The operation has authentication and authorization requirements. See Authentication and Authorization Requirements.

To replace an existing WebID profile document, issue a PUT request with a valid replacement profile document to the WebID:

Method:

PUT

Endpoint:

https://id.{ESS DOMAIN}/{username}

Body:

A profile document that conform to the WebID service’s constraints.

If the document does not conform to the service constraints, a 400 Bad Request error is returned.

Content-Type:

text/turtle

Upon successful update, the response includes a status of 204 No Content.

Add Pod Location to Profile Document#

Important

The operation has authentication and authorization requirements. See Authentication and Authorization Requirements.

To add a Pod Location to a WebID profile document, issue a POST request to the {WebID}/provision endpoint:

Method:

POST

Endpoint:

https://id.{ESS DOMAIN}/{username}/provision

Body:

A JSON document:

{
   "@context": {
      "id":"@id",
      "storage":{
         "@type":"@id",
         "@id":"http://www.w3.org/ns/pim/space#storage"
      },
      "profile":{
         "@type":"@id",
         "@id":"http://xmlns.com/foaf/0.1/isPrimaryTopicOf"
      }
   },
   "id":"{WebID}",
   "profile":"{extended Profile Resource stored on the Pod}",
   "storage":"{HTTP(S) Pod URL}"
}

See also Pod Provisioning service.

Content-Type:

application/json

Delete a Profile Document#

Important

The operation has authentication and authorization requirements. See Authentication and Authorization Requirements.

To delete a WebID profile document, issue a DELETE request to the WebID:

Method:

DELETE

Endpoint:

https://id.{ESS DOMAIN}/{username}

Body:

N/A

Content-Type:

N/A

Upon successful delete, the response includes a status of 204 No Content.

WebID Service Configuration#

As part of the installation process, Inrupt provides base Kustomize overlays and associated files that require deployment-specific configuration inputs.

The following configuration options are available for the service and may be set as part of updating the inputs for your deployment. The Inrupt-provided base Kustomize overlays may be using updated configuration values that differ from the default values.

Required#

These WebID service configuration options are set as part of updating the inputs for your deployment.

INRUPT_JWT_ISSUER_ALLOW_LIST#

A comma-separated list of trusted Solid-OIDC issuers (i.e., identity providers).

Tip

Important

For the WebID service, you must set INRUPT_JWT_ISSUER_ALLOW_LIST to a non-empty list. If the list is empty, the WebID service throws an error.

The WebID service uses the INRUPT_JWT_ISSUER_ALLOW_LIST to check the issuer iss claim (from the agent’s ID token), accepting only the issuers in the list with the following exception:

All other issuers are rejected with a 401 Unauthorized error.

See also INRUPT_JWT_ISSUER_DENY_LIST.

INRUPT_PROVISION_HTTP_BASE_URL#

The base URL of the Pod Provisioning Service. This is used by the WebID Service to link to the Pod Provisioning Service.

Important

The value requires a trailing slash /; e.g., https://provision.{ESS_DOMAIN}/.

INRUPT_START_CLIENT_ID#

Default: https://start.{ESS_DOMAIN}/app/id

The Solid-OIDC Client ID of the start application. The default start app can handle:

  • User sign up/log in, and

  • Provisioning of the user’s WebID and Pod.

INRUPT_WEBID_ALLOWED_CLIENT_IDS#

Default: INRUPT_START_CLIENT_ID, INRUPT_WEBID_CLIENT_ID

Comma-delimited list of Solid-OIDC Client IDs. The list determines which clients are authorized to modify the WebID profile documents.

Specifically, the WebID service uses INRUPT_WEBID_ALLOWED_CLIENT_IDS to check the authorized party azp claim from the agent’s ID token.

INRUPT_WEBID_CLIENT_ID#

Default: https://id.{ESS_DOMAIN}/app/id

The URL of the WebID editor application.

INRUPT_WEBID_ISSUER#

Default: https://openid.{ESS DOMAIN}

The required issuer that must appear in the WebID profile documents. See WebID Profile Document Constraints.

Tip

Ensure this issuer is in the INRUPT_JWT_ISSUER_ALLOW_LIST.

See also INRUPT_OPENID_ISSUER.

QUARKUS_DATASOURCE_JDBC_URL#

The JDBC connection string for the persistence datasource. For example, jdbc:postgresql://HOSTNAME/DATABASE-NAME.

QUARKUS_DATASOURCE_PASSWORD#

The password for connecting to the persistence datasource.

QUARKUS_DATASOURCE_USERNAME#

The username for connecting to the persistence datasource.

Kafka Configuration#

INRUPT_KAFKA_AUDITV1EVENTSENCRYPTED_CIPHER_PASSWORD#

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsencrypted topic.

INRUPT_KAFKA_AUDITV1EVENTSPRODUCERENCRYPTED_CIPHER_PASSWORD#

The strong cipher key to use when running auditing with encrypted messages over the auditv1eventsproducerencrypted topic.

Added in version 2.2.0.

KAFKA_BOOTSTRAP_SERVERS#

Default: localhost:9092

Comma-delimited list of Kafka broker servers for use by ESS services, iincluding this service.

Setting KAFKA_BOOTSTRAP_SERVERS configures ESS to use the same Kafka instance(s) for all its Kafka message channels (e.g., solidresource and auditv1out message channels). This service uses the auditv1out message channel.

Note

Inrupt-provided overlays default to using KAFKA_BOOTSTRAP_SERVERS.

To use a different Kafka instance for the auditv1out channel, use specific message channel configuration.

See also ESS’ Kafka Configuration.

Optional#

Configuration Logging#

Starting in 2.2, ESS services log their startup configuration.

INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW#

Default: inrupt,smallrye.jwt.expiration.grace,mp.jwt.verify.clock.skew,smallrye.jwt.always-check-authorization,smallrye.jwt.token.decryption.kid,smallrye.jwt.token.schemes,smallrye.jwt.require.named-principal,smallrye.jwt.time-to-live,smallrye.jwt.jwks.refresh-interval,smallrye.jwt.jwks.forced-refresh-interval,smallrye.jwt.required.claims,mp.jwt.verify.audiences

A comma-separated list of configuration property prefixes (case-sensitive) that determine which configurations are logged:

When specifying the prefixes, you can specify the prefixes using one of two formats:

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY.

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW, change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Tip

To avoid allowing more than desired configurations, specify as much of the prefix as possible. If the prefix specifies the complete prefix term, include the term delineator. For example:

  • If using dot-notation, if you want to match configuration properties of the form foobar.<xxxx>..., specify foobar. (including the dot .) instead of, for example, foo or foobar.

  • If using converted form, if you want to match configuration properties of the form FOOBAR_<XXXX>..., specify FOOBAR_ (including the underscore _) instead of, for example, FOO or FOOBAR.

Added in version 2.2.0.

INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY#

Default: inrupt.kafka

A comma-separated list of configuration name prefixes (case-sensitive) that determines which configurations (that would otherwise match the INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW) are not logged. That is, INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY acts as a filter on INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW. For example:

  • If foobar. is an allowed prefix, to suppress foobar.private.<anything>, you can specify foobar.private. to the deny list.

  • If foobar. is not an allowed prefix, no property starting with foobar. is logged. As such, you do not need to specify foobar.private to the deny list.

When specifying the prefixes, you can specify the prefixes using one of two formats:

Warning

Use the same format for both INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW and INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY.

For example, if you change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_ALLOW, change the format of INRUPT_LOGGING_CONFIGURATION_PREFIX_DENY as well.

Added in version 2.2.0.

Logging Redaction#

INRUPT_LOGGING_REDACTION_NAME_ACTION#

Default: REPLACE

Type of the redaction to perform. Supported values are:

Action

Description

REPLACE

Default. Replaces the matching text with a specified replacement.

PLAIN

Leaves the matching field unprocessed. Only available if the redaction target is a field (i.e., INRUPT_LOGGING_REDACTION_{NAME}_FIELD).

DROP

Suppresses the matching field. Only available if the redaction target is a field (i.e., INRUPT_LOGGING_REDACTION_{NAME}_FIELD).

PRIORITIZE

Changes the log level of the matching message.

SHA256

Replaces the matching text with its hash.

  • If the action is REPLACE (default), see also INRUPT_LOGGING_REDACTION_{NAME}_REPLACEMENT.

  • If the action is to PRIORITIZE, see also INRUPT_LOGGING_REDACTION_{NAME}_LEVEL.

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_ENABLED#

Default: true

A boolean that determines whether the redaction configurations with the specified INRUPT_LOGGING_REDACTION_{NAME}_ prefix is enabled.

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_EXCEPTION#

Fully qualified name of the exception class to match in the log messages (includes inner exception). Configure to target an exception message class.

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_FIELD#

Exact name of the field to match in the log messages. Configure to target a specific log message field for redaction.

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_LEVEL#

A new log level to use for the log message if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is PRIORITIZE.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_PATTERN#

A regex (see Java regex pattern) to match in the log messages. Configure to target log message text that matches a specified pattern.

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

INRUPT_LOGGING_REDACTION_NAME_REPLACEMENT#

Replacement text to use if the INRUPT_LOGGING_REDACTION_{NAME}_ACTION is REPLACE.

If unspecified, defaults to [REDACTED].

For more information on log redaction, see Logging Redaction.

Added in version 2.2.0.

Application-Defined Metadata Propagation#

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW#

A comma-separated list [2] of application-defined properties that can be included in the associated audit events (unless specified in the corresponding INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

Added in version 2.2.0.

INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_DENY#

A comma-separated list [2] of application-defined properties to exclude from the associated audit messages. This setting takes precedence over INRUPT_AUDIT_PRODUCER_REQUEST_METADATA_ALLOW.

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

Added in version 2.2.0.

INRUPT_LOGGING_REQUEST_METADATA_ALLOW#

A comma-separated list [2] of application-defined properties that can be included in the associated log messages (unless specified in the corresponding INRUPT_LOGGING_REQUEST_METADATA_DENY).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

To include a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

Added in version 2.2.0.

INRUPT_LOGGING_REQUEST_METADATA_DENY#

A comma-separated list [2] of application-defined properties to exclude from the associated log messages. This setting takes precedence over INRUPT_LOGGING_REQUEST_METADATA_ALLOW.

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

Added in version 2.2.0.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW#

A comma-separated list [2] of non-baggage request headers to add to the baggage (unless specified in the corresponding INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY); i.e., include these non-baggage request headers as application-defined properties.

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

Added in version 2.2.0.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_DENY#

A comma-separated list [2] of non-baggage request headers to exclude from being added to the baggage; i.e., excludes these headers as application-defined properties. This setting takes precedence over INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW.

The configuration is case-insensitive; i.e., the listed headers do not need to match the case of the client request headers. For example, a list that includes x-correlation-id can match (and exclude) x-correlation-id header, X-CoRrElAtIoN-Id header, etc.

See:

Added in version 2.2.0.

INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_OVERRIDES#

A flag that determines ESS behavior when metadata property is defined both as a header and as a baggage entry:

  • If true, ESS updates/overrides the baggage entry with the header value.

  • If false (the default), ESS keeps the baggage entry.

For details, Duplicate Property Definition.

Added in version 2.2.0.

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW#

A comma-separated list [2] of application-defined properties that can return as response headers (unless specified in the corresponding INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY).

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

See:

Added in version 2.2.0.

INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_DENY#

A comma-separated list [2] of application-defined properties to exclude from returning as response headers. This setting takes precedence over INRUPT_REQUEST_METADATA_REFLECTOR_HEADER_ALLOW.

This configuration is case-sensitive to the propagated properties in the baggage.

Tip

To exclude a propagated property that was added via the INRUPT_REQUEST_METADATA_PROPAGATOR_HEADER_ALLOW configuration, ensure that the cases of these properties match.

See:

Added in version 2.2.0.

General#

INRUPT_JWT_ALLOWED_SIGNATURE_ALGORITHMS#

Default: ES256, RS256

A comma-separated list that specifies the allowed encryption algorithms used to sign ID tokens.

INRUPT_JWT_ISSUER_DENY_LIST#

A comma-separated list of disallowed Solid-OIDC issuers.

INRUPT_WEBID_CLIENT_CONTACTS#

A comma-delimited list [2] of contacts (either email addresses or WebID URLs) for the client associated with the default Solid-OIDC Client ID. See INRUPT_WEBID_ALLOWED_CLIENT_IDS.

INRUPT_WEBID_CLIENT_LOGO_URI#

Default: https://{ESS DOMAIN}/logo.png

The application logo for the client associated with the default Solid-OIDC Client ID. See INRUPT_WEBID_ALLOWED_CLIENT_IDS.

INRUPT_WEBID_CLIENT_NAME#

Default: Inrupt WebID Manager

The name of the client associated with the default Solid-OIDC Client ID. See INRUPT_WEBID_ALLOWED_CLIENT_IDS.

INRUPT_WEBID_CLIENT_TOS_URI#

The URL for a terms of service document for the client associated with the default Solid-OIDC Client ID. See INRUPT_WEBID_ALLOWED_CLIENT_IDS.

QUARKUS_LOG_LEVEL#

Default: INFO

Logging level.

Additional Information#

See also https://quarkus.io/guides/all-config.